Deep Suction JET Pump

Model:AP
YINJIA Pump is a professional surface clean water pump manufacturer in China since 1990, has specialized in manufacturing various of surface clean water pumps, as well as providing quality deep suction JET pump for the world. We are committed to providing high quality product at a competitive price and backed up with superior service. Welcome to inquiry for deep suction JET pump.

Send Inquiry PDF DownLoad

Product Description

You can rest assured to buy customized deep suction JET pump from YINJIA. We look forward to cooperating with you, if you want to know more, you can consult us now, we will reply to you in time! Thedeep suction JET pumpare regarded as one of the best pumps for deep well. In fact they consist of two pumps connected in series, one is ejector-pump and the other is centrifugal pump. The ejector pump is lowered in well and connected to the centrifugal pump body by two pipes. The most remarkable character is that they can be used to supply clean water from extremely deep well. To ensure adequate counter-pressure, it is always installed with a foot valve and a filter on the suction opening. These pumps are popular in Indonesia, Thailand, Vietnam and other South-east Asia countries.

Product Feature And Application

APPLICATIONS
-Selfpriming water pumps for deep suctions up to 25m to be used in case of important water level gaps.
-Suitable to drain water from wells and in domestic fittings by small and medium sized tanks.
-Before installing the pump verify that all pipes (iron,plastic or rubber) are clean inside so to avoid any obstruction to the ejector nozzle. At the foot of the ejector must be installed a foot valve or a check valve. Installed the pump, fill completely both pipes and pump body with clean water. To preserve an efficient priming it is necessary a certain pression in the circuit, therefore it is recommended to install a membrane tank at the delivery of the pump.

DESIGN FEATURES
-Pump body/motor bracket: cast iron
-Impeller: Brass
-Ejection union: PPO
-100% copper winding
-Built-in thermal protector for single phase motor
-Motor shaft: AISI 304 welded shaft
-Mechanical seal: Graphite/Ceramic/NBR/S.S304
SPECIAL FEATURES ON REQUEST
-Anti-rust treatment for casting
-AISI 1045 motor shaft
-Carbon/SiC/V mechanical seal
-Other voltage and frequnecy
-Insultation class: F
OPERATING LIMITS
-Max. operating pressure: 8 bar.
-Max. ambient temperature: +40℃
-Max. liquid temperature: +60℃
-Max. altitude: +1000 mt.
MOTOR
-Insultation class: B
-Protection: IP44
-Speed of rotation: 2850rpm
-Continuous duty: S1