Company News

A control-focused guide comparing the four main automation strategies used in household water systems. It explains start-stop logic, tank drawdown, electronic-controller thresholds, VFD commissioning, transfer-pump level control and the protection functions required for reliable operation.

A well-system guide explaining why total depth alone cannot select a pump. It defines static and pumping water levels, sustainable yield and drawdown, compares shallow-well jet and submersible pumps, calculates total head, introduces storage for low-yield wells, and covers pressure control, water quality and protection.

A vertical-pressure guide for two-story homes, villas and small multi-level residential buildings. It calculates head to the highest fixture, checks excessive lower-floor pressure, compares source layouts and pump types, discusses one zone versus multiple zones, and includes a three-story worked example.

A calculation-led sizing article that turns a vague horsepower question into a flow-and-head duty point. It explains simultaneous demand, elevation, residual pressure, friction, suction conditions and pump curves, then gives three worked examples for a small home, multi-level home and rooftop-tank transfer duty.

A system-design guide for homes that store water. It distinguishes bulk storage tanks from pressure tanks, explains four common layouts, calculates transfer and booster duties separately, and covers suction piping, level control, automatic pressure control, dry-run protection, hygiene and maintenance.